Loading

SPT-61

Code: SPT-61-1315-2-1-001
  • Pt100/500/1000 to 4-20 mA converter module
  • powered directly from current loop
  • USB or RS-232 interface
  • automatic recognition of 2- and 3-conductor connection
  • full linearisation of the input
  • free configuration software S-Config
  • DIN rail mounting, very thin case - only 6.1 mm
Description

The SPT-61 module is equipped with Pt 100 / Pt 500 / Pt 1000 type input with automatic recognition of 2- and 3-conductor connection. Due to precision of measurement 3-wire circuit is recommended. The measurement range spans from -100°C to +600°C, and input is fully linearised according to PN-EN60751+A2:1999 standard. Module allows conversion from temperature (RTD) to the current value in 4-20 mA standard. Measurement value is transmitted to the current loop output directly after recalculation according to scale selected by user. If input signal exceeds the permissible range, shortcut or break of measurement circuit occurs. The SPT-61 module is equipped with peaks detection function. It can detect peaks of the input signal and hold their values. The device and registers configuration may be done via build in USB interface, visible for PC as Virtual Com Port. Transducer parameters can be set by S-Config software. Every unit can be factory pre-configured on request.

Specification
Number of inputs
1
Input type
RTD
Input range
Pt100, Pt500, Pt1000: -100...+600°C
Output type
4...20 mA: passive current, isolated, operating range 3,4...24 mA max.
Power supply
24V DC
Communication Interface
mini USB
USB Virtual Communication Port
RS-232
Transmission parameters
9600 bit/s, 8N1 / 8N2
Operating temperature
0...+50°C
Protection class
IP 20
Case material
NORYL UL94 V0
Mounting
DIN rail
Case dimensions
6,1 x 80 x 93,8 mm
Files
Data sheet
Manual EN
Declaration of conformity